411 University St, Seattle
Background:
Our client, a leading industrial manufacturer, sought to manage water consumption and wastewater disposal sustainably. We designed an industrial water filtration system to recycle and treat water, addressing high levels of turbidity and suspended solids, thereby reducing environmental impact and operational costs……
Background:
A well-established textile manufacturing company in Pakistan was facing severe water shortages that threatened to disrupt their dyeing processes. The company’s existing water supply was insufficient to meet their daily production needs of 150,000 gallons. They had access to bore water, but with a high TDS content of 18,000 ppm, it was unsuitable for direct use in their dyeing operations. The company approached our team to design and install a RO plant that …
Background:
Our client, a leading textile manufacturer in Pakistan, approached us
to design and install a reverse osmosis (RO) plant to address their
water treatment needs.
The company aimed to improve the quality of water used in their
manufacturing processes, reduce their environmental impact, and
comply with increasingly stringent regulations on industrial water
usage and discharge…..
Background:
A residential client approached our team with a challenge related to their gardening water. The client was experiencing gradual plant death due to unsuitable water conditions for gardening. They needed a solution to treat their water supply and maintain optimal pH levels for their plants….
Background:
As part of a comprehensive feasibility study for a large industrial area
near Riyadh, Saudi Arabia, our team was tasked with estimating the
initial system size for a photovoltaic (PV) system that could provide
the necessary electricity and thermal energy requirements for the
area’s operations through renewable sources…..
Background:
This project was completed for a residential client in Australia to
analyze the potential overshadowing impact on their rooftop solar
installation from a proposed new construction on a neighboring
property.
The client’s solar array consisted of a 3kW string system with 7
modules arranged in a single string, installed on their north-facing
rooftop. The neighbor planned to construct a new studio building that
could potentially shade the client’s panels……
Background:
Our client, a company that develops chemical-free insect control solutions for agricultural, public health and other pests, sought to optimize the design of their device for removing insects from rearing systems for more effective and humane insect removal.
They approached us to conduct a comprehensive Computational Fluid Dynamics analysis on various geometry designs …
Background:
This project was carried out for a healthcare technology company
based in the USA. The objective was to investigate the long-term
structural response and potential failure of a polycarbonate enclosure
used in one of their products.
The primary objective was to verify whether six interference fit pin
joint would provide sufficient strength after three years (26,000
hours) of service, taking into account the effects of material creep….
Background:
A leading medical device manufacturer based in Brazil approached
our team to optimize the designs of two disposable devices they
produce. The goal was to reduce material usage while ensuring the
devices could withstand operating loads without failure…..